VST-892HD-BUS is a hardwired HD PIR Motion Sensor Camera capable of sending wired signals and capturing high definition images to the Control Panel upon movement detection via the wired BUS system. VST-892HD-BUS is capable of leveraging alarm image transmission speed, with QVGA in less than 4 seconds, and VGA in just 12 seconds. VST-892HD-BUS is capable of BUS connection of several devices at once for enhanced system flexibility, while, the BUS wiring uses a custom protocol to ensure information security, with encryption to make data transmission more secure.
1280 x 720
Pixels
Image transfer
< 4s (for QVGA)
Wired BUS
system
Secured
encryption
90° Detection
Angle
12m Detection
Range
106° Camera
Field of View
2.3-2.5m Installation
Height
Key Features
1280 x 720
Pixels
Image transfer
< 4s (for QVGA)
Wired BUS
system
Secured
encryption
90° Detection
Angle
12m Detection
Range
106° Camera
Field of View
2.3-2.5m Installation
Height
HD Image Transmission
With heightened processing speed, the camera transmits larger HD images (up to 1280 x 720 pixels), for more comprehensive alarm visual verificationHigh-Speed File Transfer
Accelerates alarm image transmission with QVGA in less than 4 seconds and VGA in about 12 seconds, realizing file transfer at ground-breaking speed.Simplified wiring with BUS system
Wired BUS system allows parallel connection on one single line, eliminating cumbersome wiring procedures.Encryption for more secured communication
BUS wiring uses a custom protocol to ensure information security, with encryption to make communication more secure.3000 ft
of wiring lengthAnti-Masking Technology
Anti-masking feature allows for detection of any attempts to blind the detector.Horizontal Angle
When mounted with the optional rotating holder, the product can perform up to a total of 90° rotatable angle to achieve flexible installation.Higher Installation Height
The installation height is at 2.3 – 2.5 meters above ground, which allows additional anti-intruder capability to enhance security measures.Detection Range
The IR motion sensor is designed to give a typical detection range of 12 meters when mounted at the designated installation height.Night Vision
The night vision range extends up to 10 meters, either via a white LED flashlight which can omit warning flashing alerts, or via Infrared (IR) for discreet night vision.Pet Immunity Control
It provides pet-immunity up to 25 kilos with three selectable sensitivity levels to accommodate different environments. Users can also configure settings remotely.
Features
- Picture quality of up to 1280 x 720 pixels
- A detection range of 12 meters when mounted at 2.3-2.5 meters above ground
- Pet immunity enabled / disabled by remote control setting
- Pet weight/height: Up to 25 kilograms
- Three alarm image processing options:
- One color HD (1280x720 pixels)
- Three color VGA (640x480 pixels)
- Six color QVGA (320x240 pixels) - Delivers one image upon request
- Night illumination capability
- Warm white fill light covering up to 10 meters
- Infrared (IR) fill light covering up to 10 meters outdoor - Anti-masking feature allows for detection of any attempts to blind the detector
- Tamper protection to prevent unauthorized sabotage
Specifications
- Range: 12 meters
- Horizontal Angle: 90° degrees
- Installation Height: 2.3 – 2.5 meters
- Lens: HD CMOS Camera
- Field of View: (H) 106° degrees
- Resolution: 1280 x 720 pixels, 640 x 480 pixels or 320 x 240 pixels
- Night Illumination:
Warm white fill light covering 10 meters (VST-892HD-BUS)
Infrared (IR) fill light covering 10 meters (VST-892HD-IL-BUS) - Power Source: Input Voltage from Hybrid Panel: 13.5V DC
- Current Consumption (Standby): <5.5 mA
- Current Consumption (Maximal): <130 mA
- Mounting Options:
Wall / Corner mount
Optional accessary: Rotating holder - Rotating Angles (with Rotating holder): Horizontal: 90° angle
- Operating Temperature: -10°C to 45°C (14°F to 113°F)
- Operating Humidity: Up to 85% non-condensing @23°C
- Dimensions:
63 mm x 123 mm x 45 mm (VST-892HD-BUS)
Corner mount bracket: 44 mm x 39 mm x 20 mm
Rotating holder: 70 mm x 50 mm x 34 mm